Description
Why Choose HooTown’s One Way Window Film? The window film provides privacy in the daytime, it has a nice mirror finish during the day. From the outside, it just looks like a very reflective window. If you use curtains for privacy, it will block your view, this one way window film is much better, you can enjoy the sunlight and beautiful view from outside window. You will feel very good when you can see outside and outside cannot see you, it gives you a little more privacy from nosy neighbors. This has been just what you wanted. Installation Instructions: Recommended Tools: Squeegee, Spray Bottle, Measuring Tape, Stainless Steel Ruler, Scraper(Credit Card), Lint Free Towel. Step 1: Clean Your Windows – Use a squeegee to clean the windows, make sure your windows are thouroughly cleaned. Step 2: Measure Window’s Size and Cut Film – Cut the film 1 inch longer and wider than window. Step 3: Remove Protective Liner and Spray Soapy Water – Spray your film with soapy water, during the film separation process. Step 4: Wet the Window Well with a lot of Soapy Water. Step 5: Apply the Film Against Glass – Make sure you spray both the window and the film with enough soapy water before applying it. Step 6: Squeegee Out All Bubbles – Spray a bit of soapy water on the window film, the soapy water helps the squeegee slide easier. Use a solid squeeze to apply film and eliminate bubbles, from center to end. Step 7: Cut Off Excessive Film. Step 8: Seal & Dry – Spray over applied film again, wipe with a lint free towel. Note: Whichever side of the window has the most lighting is the side that will see in. You’ll still need to close your blinds at night. Package Included: One roll of window film 1 x User manual
- Use a squeegee to clean the windows, make sure your windows are thouroughly cleaned. Step 2: Measure Window’s Size and Cut Film.
- Cut the film 1 inch longer and wider than window. Step 3: Remove Protective Liner and Spray Soapy Water.
- Make sure you spray both the window and the film with enough soapy water before applying it. Step 6: Squeegee Out All Bubbles.
- Spray over applied film again, wipe with a lint free towel.
